Ad Radar
  • Automobile Magazine

Automobile Forums  Where Car Enthusiasts Go to Discuss Cars Online

Rbdi 800X50Ad Tracking
 
 
1 |  2 |  Next 
Item Posts   

2010 Ford Fusion Stalls

 
 | 
Driver4444 Driver4444
New User | Posts: 1 | Joined: 09/11
Posted: 09/04/11
11:40 AM

My 2010 Ford Fusion stalls when I am driving it. After the second time it happened I took it to a Ford Service Department. They could not find anything wrong with it. Last night it stalled on me again. It just stops responding to the accelerator and jerks when I try to accelerate. If I turn it off and let it sit, it will start again. The transmission/powertrain and check engine lights come on when it stalls. Luckily, all three times I have been on a road that I could safely coast to a safer stopping point. I am taking it back in for service to a different dealership. If anyone has heard of this and has any suggestions I can pass along to the service manager, I sure would appreciate it.  

waynep7122 waynep7122
New User | Posts: 35 | Joined: 04/10
Posted: 09/10/11
05:03 PM

the check engine lights will come on as the engine shuts completely off..

but did it set a code..   if it set any codes...

you did not mention which of the several motors you might have...

there are a few TSBs available over at alldatadiy.com

09-11-13 JUN 09    Engine Controls - Rough/Rolling Idle/Idle Speed Drop

this is the link and i selected the 3.5 motor..

http://alldatadiy.com/TSB/19/101961eE.html


see if you get any trouble codes at all....   be sure that when you go to the dealer that you watch the service writer scan for them and that they write them down on your work order.. and that you get a copy of them.. so you don't end up paying for the same problem again and again.....  

waynep7122 waynep7122
New User | Posts: 35 | Joined: 04/10
Posted: 09/10/11
05:06 PM

you can invest in your own scan tool.. set it up to record data and trigger when you manually depress the button or when a code sets..

please post any and all codes you get..

the harbor freight tools 98614 obd2 scanner.has the record feature...  it costs about the same as a single trip to the dealer just to get the codes scanned..


this is a link to the harbor freight scan tool manual.. start reading at section 5.2... and on printed page #35 is how to set it up to record the data stream...

http://manuals.harborfreight.com/manuals/98000-98999/98614.pdf  

TitanMom_99 TitanMom_99
New User | Posts: 2 | Joined: 09/11
Posted: 09/13/11
01:13 PM

The same thing happened to me. Can you provide your email? I'd like to chat with you.
Thanks!  

jnburke83 jnburke83
New User | Posts: 1 | Joined: 03/12
Posted: 03/25/12
01:19 PM

JUST PURCHASED A 2010 FORD FUSION AND HAS STARTED DOING THE SAME THING THE CAR WILL STALL BUT NOT GO DEAD BUT DOSENT RESPOND TO THE GAS PEDAL THE ENGINE WILL IDLE REAL ROUGH , YOU HAVE TO TURN THE CAR OFF AND BACK ON TO GET THE CAR TO RESPOND WE TOOK IT TO THE DEALER SHIP THEY SAID THEY CLEARED A CODE BUT IT STARTED DOING IT AGAIN BUT NOW IT WONT REGISTAR A CODE SO THE DEALERSHIP DOSENT KNOW WHATS GOING ON PLEASE HELP IF ANY CAN :confused Confused  

beavis_ews beavis_ews
New User | Posts: 1 | Joined: 04/12
Posted: 04/26/12
10:30 PM

My 2010 fusion just did this tonight.  I shut it off and started it back up and it was ok.  But I know it's gonna happen again.  Please email me if you know what's wrong.   beavis_ews@yahoo.com.  My warranty is close to expiring.  I'd like to get it fixed before its too late.  I have the six cylinder sel model.  

dandroid69 dandroid69
New User | Posts: 1 | Joined: 04/12
Posted: 04/29/12
09:09 AM

Wow.  My 2010 started doing this as well.  I took it to the dealership.  They said it was the throttle body, which really makes no sense.  A throttle body issue would be consistent.  This happens, usually, every two or three days in normal driving.  I don't mind paying to have it fixed if I can't do it, but $300 to replace the wrong part isn't going to happen.  Any thoughts on this?  It's a 2.5 Liter 4 cyl.  

Satamike Satamike
New User | Posts: 1 | Joined: 05/12
Posted: 05/10/12
04:19 AM

It has also happened to me as well. It looks like ford needs to look into this and get it resolved ASAP before someone gets killed. It stalls, no response from gas petal, the wrench is displayed on the dash but I can pull over and restart .  It runs fine for some time after. This has happened at least 6 times in the last 90 days. Mine is a 6 cyl 2010 se  with 65+ miles on it. I am posting this to add to the list of complaints
Thanks.  

dstew dstew
New User | Posts: 1 | Joined: 05/12
Posted: 05/14/12
11:24 AM

I had the same problem.  The dealer changed the throttle body and it solved the problem.  Fortunately it was still under warranty, with 27K miles.  

stevetex1620 stevetex1620
New User | Posts: 1 | Joined: 08/12
Posted: 08/13/12
06:59 PM

I have the V6 SE 2010 as well with 56k on it.  Just started having this issue in last two weeks.  Gotten to the point where I cannot idle at all, have had to shift into manual and keep pumping the gas.  Get any answers on this issue?  

mbernal60 mbernal60
New User | Posts: 2 | Joined: 10/12
Posted: 10/05/12
09:06 AM

I too have 2010 Ford Fusion SE with 35,000 miles and it is doing the same thing, the car doesn't go dead but no amount of pressing the gas pedal will make it go, it just kind of trembles and moves very slow.
This has to be a recall, we can't all be having the same problem. Can anyone help me? Where do we find out if there is a recall on it?  

mbernal60 mbernal60
New User | Posts: 2 | Joined: 10/12
Posted: 10/06/12
06:34 AM

OK folks , here we go The dealer just called me and it seems they had to replace the Throttle body. Luckily still under warranty (under 35,000). I guess time will tell if it does it again I will post again.  

brobst56@msn.com brobst56@msn.com
New User | Posts: 1 | Joined: 11/12
Posted: 11/19/12
04:17 PM

I have exact symptoms with mine for over 3 weeks now,car has 43,000 miles, and getting worse. Cops pulled up behind us tonight when it happened. He almost rear ended us when it happened. Did you get yours fixed and what was wrong with it? thanks  

sana@candorrecruitmentgroup.com sana@candorrecruitmentgroup.com
New User | Posts: 16 | Joined: 12/12
Posted: 12/05/12
01:10 AM

The article is very good, I like it very much.Here I learned a lot, then I will pay more attention to you.
Recruitment services in Pakistan
Employment Provider Group
Candor recruitment Group  

Gary Bradnick Gary Bradnick
New User | Posts: 5 | Joined: 06/13
Posted: 06/19/13
02:52 PM

Same problem for me. Two weeks ago my 2010 Fusion SE (35,000 mi) cut out on the highway. Tonight it did it on a slow left turn. Car is still on but no gas. I tried injector cleaner two weeks ago. Very frustrating. I'm going to call th dealer tomorrow and see if they have been getting this problem. Will post what I find out.  

1 |  2 |  Next 
Xml
Showbuyersguide Hide
2015 Ford Fusion
22400 - 32600
Button Getmyprice
Body Style:
Sedan